Publikationsliste


Gas-tight means zero defects - design considerations for thin-walled fluidic devices with overhangs by laser powder bed fusion
Grinschek, F.; Charles, A.; Elkaseer, A.; Klahn, C.; Scholz, S. G.; Dittmeyer, R.
2022. Materials & Design, 223, 111174. doi:10.1016/j.matdes.2022.111174
Role of copper and alumina for heat transfer in hybrid nanofluid by using Fourier sine transform
Souayeh, B.; Abro, K. A.; Siyal, A.; Hdhiri, N.; Hammami, F.; Al-Shaeli, M.; Alnaim, N.; Raju, S. S. K.; Alam, M. W.; Alsheddi, T.
2022. Scientific Reports, 12 (1), Art.-Nr.: 11307. doi:10.1038/s41598-022-14936-x
Bereitstellung von methanbasierten Kraftstoffen aus biogenen Abfällen: Innovative Prozesskette zur Herstellung von ressourcen- effizienten methanbasierten Bio-Kraftstoffen für Landmaschinen und den Schwerlastverkehr
Holl, E.; Müller, C.; Staudt, C.; Mörs, F.; Schütte, J.; Pratofiorito, G.; Pult, F.; Becker, S.; Geimer, M.; Wohlfahrt, F.; Pontzen, F.
2022. GWF / Gas + Energie, 163 (9), 60–73
CO2 conversion with atmospheric pressure plasmas sustained with ultra-short microwave pulsations
Soldatov, S.; Link, G.; Navarrete, A.; Silberer, L.; Dittmeyer, R.; Jelonnek, J.
2022, August 19. 4th Global Congress on Microwave Energy Applications (GCMEA 2022), Chengdu, China, August 17–20, 2022
Prozess 4.0 Ultraeffizienz und Digitalisierung. Teil 4: Ressourceneffizienz durch Digitalisierung in der Prozessindustrie - Abschlussbericht
Jurisic, A.; Stapf, D.; Delgado Otalvaro, N.; Herrera Delgado, K.; Sauer, J.; Klumpp, M.; Dittmeyer, R.
2022. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000150157
Numerical Simulation Approach for a Dynamically Operated Sorption-Enhanced Water-Gas Shift Reactor
Stadler, T. J.; Knoop, J.-H.; Decker, S.; Pfeifer, P.
2022. Processes, 10 (6), Art.-Nr. 1160. doi:10.3390/pr10061160
Detailed Kinetic Modeling of CO₂-Based Fischer–Tropsch Synthesis
Brübach, L.; Hodonj, D.; Biffar, L.; Pfeifer, P.
2022. Catalysts, 12 (6), Art.-Nr. 630. doi:10.3390/catal12060630
Modelling and Simulation of an Aerosol-on-Demand Print Head with Computational Fluid Dynamics
Ungerer, M.; Zeltner, D.; Wenka, A.; Gengenbach, U.; Sieber, I.
2022. Proceedings of the 12th International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2022), July 14-16, 2022, in Lisbon, Portugal. Ed.: Gerd Wagner, 44–51, SciTePress. doi:10.5220/0011258100003274
Palladium Membrane with High Density of Large-Angle Grain Boundaries to Promote Hydrogen Diffusivity
Hadjixenophontos, E.; Mahmoudizadeh, M.; Rubin, M.; Ullmer, D.; Razmjooei, F.; Hanf, A. C.; Brien, J.; Dittmeyer, R.; Ansar, A.
2022. Membranes, 12 (6), Art.Nr. 617. doi:10.3390/membranes12060617
Improvement of an annular thin film UV-C reactor by fluid guiding elements
Hirt, B.; Hansjosten, E.; Hensel, A.; Gräf, V.; Stahl, M.
2022. Innovative Food Science & Emerging Technologies, 77, Art.-Nr.: 102988. doi:10.1016/j.ifset.2022.102988
Editorial overview: Reaction engineering and catalysis: Microreactor engineering
Dittmeyer, R.; Kuhn, S.
2022. Current Opinion in Chemical Engineering, 36, Art.-Nr.: 100822. doi:10.1016/j.coche.2022.100822
Operando high pressure XAS and QEXAFS-XRD to study bimetallic Pd-based catalysts for the direct H2O2 synthesis
Doronkin, D.; Deschner, B. J.; Wang, S.; Dittmeyer, R.; Behrens, S.; Grunwaldt, J.-D.
2022, June 8. 19th Nordic Symposium on Catalysis (NSC 2022), Espoo, Finland, June 6–8, 2022
Pulsed microwave plasma for CO2 -recycling
Link, G.; Soldatov, S.; Navarrete, A.; Dittmeyer, R.; Jelonnek, J.
2022, May 31. 11th Power Electronics for Plasma Engineering Conference (PE² 2022), Freiburg, Germany, May 31–June 1, 2022
Getting Chemical and Biochemical Engineers Excited about Additive Manufacturing
Grinschek, F.; Ladewig, B.; Navarrete Munoz, A.; Klahn, C.; Dittmeyer, R.
2022. Chemie Ingenieur Technik, 94 (7). doi:10.1002/cite.202200010
Multiobjective Optimization of Laser Polishing of Additively Manufactured Ti-6Al-4V Parts for Minimum Surface Roughness and Heat-Affected Zone
Solheid, J. S.; Elkaseer, A.; Wunsch, T.; Scholz, S.; Seifert, H. J.; Pfleging, W.
2022. Materials, 15 (9), Art.Nr. 3323. doi:10.3390/ma15093323
A Holistic Consideration of Megawatt Electrolysis as a Key Component of Sector Coupling
Emonts, B.; Müller, M.; Hehemann, M.; Janßen, H.; Keller, R.; Stähler, M.; Stähler, A.; Hagenmeyer, V.; Dittmeyer, R.; Pfeifer, P.; Waczowicz, S.; Rubin, M.; Munzke, N.; Kasselmann, S.
2022. Energies, 15 (10), 3656. doi:10.3390/en15103656
Fabrication of Sectionally Permeable Components with Curved Surface by Laser‐Beam Powder‐Bed Fusion
Xie, D.; Fränkle, B.; Klahn, C.; Dittmeyer, R.
2022. Chemie Ingenieur Technik, 94 (7), 983–992. doi:10.1002/cite.202200009
Design and experimental setup of a new concept of an aerosol-on-demand print head
Sieber, I.; Zeltner, D.; Ungerer, M.; Wenka, A.; Walter, T.; Gengenbach, U.
2022. Aerosol Science and Technology, 56 (4), 355–366. doi:10.1080/02786826.2021.2022094
High-pressure XAS & XRD infrastructure for operando catalytic studies at the synchrotron: A Fischer-Tropsch long-term experiment
Serrer, M.-A.; Zimina, A.; Saraҫi E.; Loewert, M.; Pfeifer, P.; Grunwaldt, J.-D.
2022, March 30. 14th International Conference on Synchrotron Radiation Instrumentation (SRI 2022), Online, March 28–April 1, 2022
3D-printed structured catalysts for CO methanation reaction: Advancing of gyroid-based geometries
González-Castaño, M.; Baena-Moreno, F.; Carlos Navarro de Miguel, J.; Miah, K. U. M.; Arroyo-Torralvo, F.; Ossenbrink, R.; Odriozola, J. A.; Benzinger, W.; Hensel, A.; Wenka, A.; Arellano-García, H.
2022. Energy Conversion and Management, 258, Art.-Nr.: 115464. doi:10.1016/j.enconman.2022.115464
Recent Progress in Direct DME Synthesis and Potential of Bifunctional Catalysts
Banivaheb, S.; Pitter, S.; Delgado, K. H.; Rubin, M.; Sauer, J.; Dittmeyer, R.
2022. Chemie - Ingenieur - Technik, 94 (3), 240–255. doi:10.1002/cite.202100167
Efficiency of a compact CO coaxial plasma torch driven by ultrafast microwave power pulsing : Stability and plasma gas flow dynamics
Soldatov, S.; Carbone, E.; Kuhn, A.; Link, G.; Jelonnek, J.; Dittmeyer, R.; Navarrete, A.
2022. Journal of CO2 Utilization, 58, Art.-Nr.: 101916. doi:10.1016/j.jcou.2022.101916
Influence of CO‐Rich Syngas on the Selectivity to C–C in a Coupled Fischer-Tropsch/Hydrocracking Process 
Stadler, T. J.; Bertin-Mente, B.; Dittmeyer, R.; Brübach, L. T.; Böltken, T.; Pfeifer, P.
2022. Chemie - Ingenieur - Technik. doi:10.1002/cite.202100172
Kinetic Analysis of CO Hydrogenation to Long-Chain Hydrocarbons on a Supported Iron Catalyst
Brübach, L.; Hodonj, D.; Pfeifer, P.
2022. Industrial & engineering chemistry research, 61 (4), 1644–1654. doi:10.1021/acs.iecr.1c04018
Metal-Organic Framework MIL-68(In)-NH on the Membrane Test Bench for Dye Removal and Carbon Capture
Hosseini Monjezi, B.; Sapotta, B.; Moulai, S.; Zhang, J.; Oestreich, R.; Ladewig, B. P.; Müller-Buschbaum, K.; Janiak, C.; Hashem, T.; Knebel, A.
2022. Chemie-Ingenieur-Technik, 94 (1-2), 135–144. doi:10.1002/cite.202100117
Investigation of mass transport processes in a microstructured membrane reactor for the direct synthesis of hydrogen peroxide
Trinkies, L. L.; Düll, A.; Zhang, J.; Urban, S.; Deschner, B. J.; Kraut, M.; Ladewig, B. P.; Weltin, A.; Kieninger, J.; Dittmeyer, R.
2022. Chemical engineering science, 248, Ar. Nr.: 117145. doi:10.1016/j.ces.2021.117145